How to replace an electronic card on a towel dryer?

To replace it, you need:

• A TORX key
• A pliers
• A flat screwdriver

The steps to be followed :

• Cut off power heater supply before your intervention
• Unscrew the plate under your TIMERPROG
• Remove the TIMEPROG by unscrewing the nut
• Identify the resistance wires then, disconnect them
• Disconnect the TIMERPROG supply wires
• Remove the 2 small buttons with the pliers using appropriate pressure then bring them out.
• Remove the adjustment button and put it on the star symbol
• Then, pull it down. If you need, identify the notch in the box
• Remove the old electronic card
• Identify the power wires supply and disconnect them before connecting the wires on the new electronic card
• Raise up the card in the box then insert buttons
• Connect the electrical wires on the new electronic card
• Screw the resistance wires through the box. Don’t forget the nut
• Rise up your box and block it
• Close the plate above the TIMERPROG
• Then, turn on the power supply

Where can you find the products on the website?

You will find our electronic cards models on our web site