Molybdenum test strip for tracer detection- RBM - BANDELETTES

This kit enables the detection of RBM’s innovative Clean Tracerproducts by checking the concentration level after the water treatment product has been injected into the system. This compact molybdenum test strip pack is suitable for 100 on-site tests, ideal for taking with you to any site.

Precautions: Only use the required number of test strips and close the box once the test strips have been removed from the packet.

For use with water treatment products from the Clean Tracer range:

• RBM Clean Tracer protection:
  • RBM CT01 Protector – Clean Tracer – item number 908250
  • RBM CT02 Protector - Clean Tracer - item number 908251

• RBM Clean Tracer sludge remover:
  • CT03 Sludge remover - Clean Tracer - item number 908252
  • CT04 Rapid sludge remover - Clean Tracer - item number 908253

INCLUDES:

• 1x aluminium box
• 100x molybdenum test strips
• 2x bottles of Mo6+-1
• 1x 5 ml graduated container
• 1x measuring accessory

INSTRUCTIONS FOR USE:

1. Rinse the container with the appropriate solution
2. Add the solution up to the mark, to 5 ml
3. Use the measuring tool to measure out the equivalent of 2 level scoops of Mo6+-1
4. Mix everything together thoroughly, taking care to do so gently
5. Place the test strip in the container containing the diluted Mo??-1 solution for 60 seconds
6. Shake off any excess liquid
7. Compare with the colour scale