Expert Advice on: Maintaining an Oil Nozzle

1. Where to Store a Nozzle?

It’s recommended to store a nozzle in a protective case for nozzles. A new nozzle should not be installed on an unused burner.
It should not be left in a toolbox or a pocket full of dirt, as this risks clogging it. If the mistake has already been made, then it’s too late.
There’s no need to blow into it or rub inside. It’s neither a flute nor the lamp of the Genie.

2. How to Move an Oil Nozzle?

To avoid getting dirty, there are cases to transport oil nozzles. It’s a part that indirectly contributes to oil boiler maintenance.

3. What Precautions to Take Before Installing an Oil Nozzle?

First, wash your hands. Then, do not install it if it is too cold. Wait a moment for it to adjust to room temperature.
When mounting it, do not be too rough. You risk damaging the seal between the nozzle and the nozzle holder.

4. How to Clean a Nozzle?

By scraping the orifice or the grooves of the cone, you risk making the situation worse.
Your only solution might be to call an expert, but it would still be less expensive to just replace the nozzle directly.

5. What Causes Sparks in the Flame?

Your nozzle may be defective. Otherwise, it could be the flame holder or the burner head.
Is the oil pressure too low? Is it too viscous? Is it too cold? Is there an excess of air?

6. How to Install the Nozzle on the Nozzle Holder?

Simply insert it, without too much force. The seals are fragile, and damaging them would create a fuel leak between the nozzle and the nozzle holder.